Jump to content

2 files

  1. The legend of the devil in Iron FAQ_v2.pdf

    Translated and enlarged FAQ file of the Campaign Book - The legend of the devil in Iron FAQ_v2.pdf

    This file was originally in the French language (see the download section in the Communauté Francaise). I added FAQ's from BoardGameGeek, noted problems with some of the Game boards and lists of needed miniatures and maps per scenario.

    Have fun with Conan!

    322 downloads

       (0 reviews)

    Updated

  2. Player's and Overlord's rulebooks v2

    .pdf files of both v2 rulebooks, March 2017.

    695 downloads

       (0 reviews)

    Submitted


  • File Reviews

    • By fooforge · Posted
      I've never thought I would leave a review for a 3D printed rock, but then again as a kid I also didn't expect I would ever own a 3D Printer. So, yeah long story short: It's a great rock! I would download and print that rock again. Kudos to the makers for publishing this! Much appreciated.   3D Printer: Ultimaker 3 Extended Filament: PLA in anthracite color from dasfilament.de Print Settings: Layer Height: 0.15mm Wall Thickness: 1.2mm Speed: 40mm/s Support:
    • By Drewbag · Posted
      This isn't a review, more a query. If I download this map (while not owning the Poseidon expansion) how can I find the deployment zones and Omphalos crystal locations?
    • By VerniusNL · Posted
      Design looks good . Cannot place miniatures on the top very well.  Printed without support just fine, problably gonna make some adjustments to the orignal to make it work better.   3D Printer Creality Cr 10  Print settings: Filament : PETG Temp Nozzle : 242 C Temp Bed : 70 Layer Hight: 0.2 No support Print time: about 7 hours. Print size: Original sizes (110x70x65 mm)
    • By VerniusNL · Posted
      Design looks great . Can hold miniatures reasonably well, it’s pretty flat.  I didn’t want to print with support (always a pain to clean that up)  so that caused some minor issues, chiefly a hole at the top which i closed with random piece of PETG. Now i am looking to prime it and paint and the closed up hole will function as a puddle after the paintjob.   3D Printer Creality Cr 10  Print settings: Filament : PETG Temp Nozzle : 242 C Temp Bed : 70 Layer Hight: 0.2
    • By Primeval · Posted
      Nicely done and much needed!
×
×
  • Create New...

Important Information

Our website uses cookies to guarantee you the best navigation. By continuing your visit, you confirm that you accept these cookies. Our Cookie Policy has other terms. Privacy Policy