garbetsp Posted December 1, 2020 Report Share Posted December 1, 2020 2 Quote Link to comment Share on other sites More sharing options...
Seaorgrudy Posted December 1, 2020 Report Share Posted December 1, 2020 Boom! Nice! 1 Quote Link to comment Share on other sites More sharing options...
Not Quite Dead Posted December 5, 2020 Report Share Posted December 5, 2020 I've never noticed that you rebase your miniatures prior to this one. Did you only rebase Atali or do you plan to rebase all of them, or only minis from Nordheim? Quote Link to comment Share on other sites More sharing options...
garbetsp Posted December 5, 2020 Author Report Share Posted December 5, 2020 It was my first attempt at rebasing. I have no idea what I'll do with the rest. That one however, really needed something to give it bit more umph. She is up on a tree stump, calling to Conan. 1 Quote Link to comment Share on other sites More sharing options...
garbetsp Posted December 7, 2020 Author Report Share Posted December 7, 2020 Question on rebasing: How do you make sure it's solid on the base for play? I understand if they're for show one can keep them in a case and handle delicately, but for table top use they have to be sturdy enough for regular handling. I've seen several rebased that look positively fragile with a tiny point of contact and just a spot of glue. Atali struck me as somewhat solid across her base, so I wasn't worried. Quote Link to comment Share on other sites More sharing options...
Not Quite Dead Posted December 9, 2020 Report Share Posted December 9, 2020 I never rebased anything, so I can't be of much help. Maybe @Roolz could give you some insight on how to rebase properly. 😉 Quote Link to comment Share on other sites More sharing options...
Roolz Posted December 10, 2020 Report Share Posted December 10, 2020 (edited) On 12/7/2020 at 2:56 PM, garbetsp said: Question on rebasing: How do you make sure it's solid on the base for play? I understand if they're for show one can keep them in a case and handle delicately, but for table top use they have to be sturdy enough for regular handling. I've seen several rebased that look positively fragile with a tiny point of contact and just a spot of glue. Atali struck me as somewhat solid across her base, so I wasn't worried. Depends on the mini and base. If the contact surface is large enough versus mini's size and weight, superglue is generally strong enough for gaming. For example, if you glue a plastic mini of a human with its 2 feet on the ground, it generally holds. If not, it's safer to pin the mini to be base before glueing. Same example as the above with a metal mini, or a plastic mini with just one foot on the ground. Pinning can also be necessary if the base is heavier than the mini itself. For example when you weigh the base with a fairly heavy coin/washer. In the case of transparent acrylic bases, pinning is generally an issue, you just have to rely on glue. But it generally holds because the surface is very flat and smooth (=good adhesion), and plastic minis are lightweight. Luckily, until now I only had 1 plastic mini that detached from an acrylic base (I used too little glue, so I had to re-glue it). Edited December 10, 2020 by Roolz 1 Quote Link to comment Share on other sites More sharing options...
garbetsp Posted December 10, 2020 Author Report Share Posted December 10, 2020 Thanks. I suspected these things, but it's good to know. I've had to weight a base in another game where the mini came way out over it in the front making it unstable. AB epoxy and a tiny fishing weight did the trick. 5 hours ago, Roolz said: In the case of transparent acrylic bases, pinning is generally an issue, you just have to rely on glue. But it generally holds because the surface is very flat and smooth (=good adhesion), and plastic minis are lightweight. Luckily, until now I only had 1 plastic mini that detached from an acrylic base (I used too little glue, so I had to re-glue it).I It's my understanding that super glue is incredibly strong in one direction and very weak side to side. If you have something super glued it can be near impossible to pull apart (the bond being stronger than the material) but if it takes a hit to the side it can just let go with little force. If the surface is crinkled or too rough then the bond direction is scrambled and it does not adhere well. Quote Link to comment Share on other sites More sharing options...
Roolz Posted December 11, 2020 Report Share Posted December 11, 2020 14 hours ago, garbetsp said: It's my understanding that super glue is incredibly strong in one direction and very weak side to side. If you have something super glued it can be near impossible to pull apart (the bond being stronger than the material) but if it takes a hit to the side it can just let go with little force. If the surface is crinkled or too rough then the bond direction is scrambled and it does not adhere well. Indeed. Basically, all adhesives are weaker on the sides (shear strength), some more than others. And it highly depends on the surfaces and materials. 1 Quote Link to comment Share on other sites More sharing options...
Seaorgrudy Posted December 11, 2020 Report Share Posted December 11, 2020 I love being able to enjoy this detailed discussion as part of this group. Thank you 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.